Home > Nickel Alloy > Nickel Alloy 200 Coils
Nickel Alloy 200 Coils stand as a pinnacle in the realm of adaptable materials, valued for their outstanding resistance to corrosion, high temperature endurance, and impressive mechanical strength. tailor-made largely from nickel, with deliberate alloying components such as copper, these coils are celebrated for their reliability across a wide range of corrosive conditions, from acidic surroundings to caustic solutions and even salt-rich atmospheres. Featuring a composition designed to withstand and thrive, Nickel Alloy 200 Coils act as a foundation across industries covering chemical processing, aerospace pursuits, oil and gas exploration, maritime activities, and beyond, where dependable consistency and peak performance are essential.
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
At Sumakhsteel, we are proud to be the largest supplier and manufacturer in the USA, delivering advanced solutions for every one of your piping requirements. Thanks to our modern production facilities strategically positioned across the USA, we maintain an extensive stock of more than 25,000 tons of top-grade materials on hand and ready to ship.
Reach out to us for a fast quote on your requirement.
We provide these Nickel Alloy 200 Coils in accordance with DIN, ISO, JIS or ANSI Standard.
Corrosion resistance: Nickel alloy 200 is fully resistant to corrosion, which makes it well suited for uses that involve contact with severe environments or corrosive substances. This resistance applies to both acidic and alkaline conditions.
High Temperature Performance: Nickel alloys hold onto their mechanical characteristics at temperatures exceeding 200, which makes them perfect for typical high-temperature uses, such as in aerospace or medicine offices in the field
Electrical conductivity: Nickel alloy 200 shows outstanding electrical conductivity, which makes it appropriate for electrical and electronic uses, such as heating elements, electrical resistors and electrical contractors.
Thermal Conductivity: Nickel alloy 200 offers high thermal conductivity, which makes it valuable where heat transfer matters, such as in heat exchangers and cooling systems.
Low Magnetic Permeability: Nickel alloy has a low magnetic permeability of 200, which makes it appropriate for uses where reducing magnetic interference is important, such as in electrical and electronic devices.
Easy to manufacture: Nickel alloy 200 can be readily produced through conventional manufacturing methods such as machining, welding and fabrication, where shapes and sizes are adjusted to satisfy specific application needs
Reliability and Consistency: Thanks to its superior mechanical properties and corrosion resistance, Nickel Alloy 200 coils deliver reliability and durability while lowering maintenance needs and lifetime costs.
Nickel Alloy 200 Coils have applications as varied as the industries they cater to, powered chiefly by the aerospace, railway, construction and automotive sectors along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Chemical applications: Nickel alloy 200 coils withstand a wide range of chemicals, which makes them well suited for pumps, valves, heat exchangers and other chemical equipment
Electronics: They are employed in electronic parts that demand resistance to high temperatures and corrosion, including electrical connectors and copper poles
Aerospace and Safety: Nickel alloy 200 coils serve aerospace and military purposes where high strength, corrosion resistance and reliability matter, such as in aerospace and missile systems
Marine Applications: Because they resist seawater, these coils are applied in marine equipment like shipbuilding, marine platforms and desalination plants
Food processors: Nickel alloy 200 coils are applied in food processing equipment that calls for corrosion resistance to uphold hygiene standards.
Heat Exchanger: Thanks to its resistance to high temperatures and corrosion, it is applied in power generation, chemical processing, and HVSC applications.
Oil and Gas Industry: Nickel is applied in the nickel gas industry for uses such as piping, tubing and fittings that need resistance to hot weather and high temperatures
Medical Devices: In medicine, nickel alloy 200 coils are used in surgical instruments, medical implants and dental devices owing to their biocompatibility and resistance to body fluids
Application Requirements: Indicate the particular application for which the coils are required. Nickel alloys are recognized for their outstanding corrosion resistance across a range of environments, including 200 acids and bases. Be sure the coils you select suit your intended purpose, whether that is chemical processing, electronics, or the marine environment.
Temperature and Pressure Conditions: Take into account the temperature and pressure conditions the coils will face. Nickel Alloy 200 offers excellent mechanical stability at both high and low temperatures, which makes it fit for a variety of operating conditions. That said, confirm the coils can handle your application’s heat and pressure levels without sacrificing performance.
Size and Dimensions: Define the size and dimensions of the coils required for your application. Nickel Alloy 200 coils come in a variety of sizes and thicknesses to serve various needs. Make sure the coils you pick are compatible with your device and simple to plug in without any modification.
Quality and certification: Verify the quality and certification of coils to confirm they satisfy industry standards and specifications. Seek out coils produced by reputable manufacturers that comply with the relevant quality standards, such as ASTM, ASME, or ISO. Also, think about whether specific testing or certification programs exist to guarantee the coils are reliable and functional.
Cost Considerations: Weigh the prices of the various nickel alloy 200 coils available on the market. Although cost matters, it shouldn’t be the only factor guiding your decision. To arrive at the most cost-effective choice over the long run, take the complete value proposition into account, including the coils’ quality, performance, and durability.
Phone Us: +91 7208967217
E-mail: sales@sumakhsteel.com
